Needle thrust · 1.75 mm filament
bore Ø9.53 mm · 13 needles Ø1.75 × 10 mm · flanged races
Needles cut from 1.75 mm filament between two flanged races.

A large flat needle thrust bearing: 1.75 mm filament needles 10 mm long, in a cup with snap catches, on a 200 mm bore.
Using the CheapCADTools connector, design a needle thrust bearing in Printed Bearing Designer, "200 mm bore · snap cup · 10 mm needles": bore Ø200 mm · 212 needles Ø1.75 × 10 mm · a cup with snap catches. Check the design, apply any Auto-fix it suggests, then export the printed parts as STL and STEP and give me the download link.
Paste it into Claude, ChatGPT or any AI app with the CheapCADTools connector, and it designs this bearing with you, checks it and hands you the files. How to connect your AI.
The link opens the bearing in the Printed Bearing Designer's 3D view. Change the bore, the balls or needles, the outside, then download STL or STEP. Print the fit coupon first, so it fits your printer.
bore Ø9.53 mm · 13 needles Ø1.75 × 10 mm · flanged races
Needles cut from 1.75 mm filament between two flanged races.
bore Ø9.53 mm · 9 needles Ø2.85 × 10 mm · a cup with snap catches
Thicker 2.85 mm filament needles in a cup that snaps shut.
bore Ø9.53 · OD Ø24.23 · width 7.14 mm · 6 steel BBs Ø4.5
The tested print: a deep groove bearing for a 3/8 in rod, 4.5 mm steel BBs in a crown cage.
bore Ø8 · OD Ø22.7 · width 7.14 mm · 5 steel BBs Ø4.5
A 608-sized job for an 8 mm shaft, 4.5 mm steel BBs.