Sample · Crossed roller bearing

Crossed roller · 30 mm bore

Printed tapered rollers crossed at 90°, spacers A and B between them, M3 bolts.

Crossed roller bearings

Build it with your AI

Using the CheapCADTools connector, design a crossed roller bearing in Printed Bearing Designer, "Crossed roller · 30 mm bore": bore Ø30 · OD Ø79.75 · width 11.84 mm · 20 rollers Ø6 · spacers A and B · M3 bolts: 8 inner, 12 outer. Check the design, apply any Auto-fix it suggests, then export the printed parts as STL and STEP and give me the download link.

Paste it into Claude, ChatGPT or any AI app with the CheapCADTools connector, and it designs this bearing with you, checks it and hands you the files. How to connect your AI.

What's in this design

Crossed roller bearing

  • bore Ø30 · OD Ø79.75 · width 11.84 mm · 20 rollers Ø6 · spacers A and B · M3 bolts: 8 inner, 12 outer

Printed parts

  • Inner race
  • Outer race, bottom half
  • Outer race, top half
  • Roller
  • Roller spacer A (STL only for now)
  • Roller spacer B (STL only for now)

Notes

  • The roller is 5.10 mm long for 6.0 mm across: well under L ≈ D, so it may tip in the channel.

The link opens the bearing in the Printed Bearing Designer's 3D view. Change the bore, the balls or needles, the outside, then download STL or STEP. Print the fit coupon first, so it fits your printer.

More samples

Related printed bearings

Opening the tool…
The first load can take a few seconds.