AT5 24T & 36T, Heat-Set Insert Set Screws

Two timing pulleys, made with the CheapCAD Tools Timing Pulley Generator.

  AT-AT5-24T.stl                  pulley 1, 24 teeth
  AT-AT5-36T-P2+flange.stl        pulley 2, 36 teeth
  ATAT5-36T-3DP-upper-flange.stl  pulley 2's top flange, printed on its own

Open the design in the generator, change anything, and download STEP, DXF
or SVG as well:
  https://cheapcadtools.com/tools/pulleys/?family=AT&pitch=AT5&teeth=24&bore=8&print_extra=0&clearance_preset=STANDARD&clearance_custom=0&backlash_preset=STANDARD&backlash_custom=0&hub_od=22&hub_height=9&hub_screw_size=M4&hub_screw_hold=insert&hub_screw_count=2&hub_screw_dia=4&hub_captured_nut=0&hub_screw_hole_dia=5.4&dual=true&center_distance=142.18&p2_teeth=36&p2_bore=10&p2_print_extra=0&p2_clearance_preset=STANDARD&p2_clearance_custom=0&p2_backlash_preset=STANDARD&p2_backlash_custom=0&p2_hub_od=24&p2_hub_height=9&p2_hub_screw_size=M4&p2_hub_screw_hold=insert&p2_hub_screw_count=2&p2_hub_screw_dia=4&p2_hub_captured_nut=0&p2_hub_screw_hole_dia=5.4&p2_spokes_enabled=1&p2_spokes_hub_od=16&p2_spokes_rim_depth=5&p2_spokes_width=4&p2_spokes_fillet_tip=1&p2_spokes_fillet_base=1.5&p2_spokes_count=5&p2_spokes_height=0&p2_flange_enabled=1&p2_flange_3dprint=1&p2_flange_angle=15&p2_flange_rim_radius=3&p2_flange_height=1.5&p2_flange_plate_height=1.0&p2_flange_bend_radius=0&p2_flange_top_separate=1&p2_hub_height_for_flange=9&p2_flange_nubs_enabled=1&p2_flange_nub_count=12&p2_flange_nub_dia=3&p2_flange_nub_height=2&p2_flange_nub_allowance=0.2&p2_flange_supports_enabled=0&p2_flange_support_nozzle_dia=0.4&p2_flange_support_max_spacing=10&p2_flange_support_air_gap=0.2&clearance_height=0.5&sv=1&belt_height=10&ref=sample-zip

STLs are printed size with no print compensation. For a tight fit on your
printer, open the design and set 3D Print Compensation before downloading.

Licence: Creative Commons Attribution 4.0 (CC BY 4.0).
Credit "CheapCAD Tools - cheapcadtools.com" when you share them.
